Rohde & Schwarz URV35 Power Level Meter with NRV-Z51 DC-18GHz Sensor, 30dB Atten

Description

Rohde & Schwarz URV35 Level Meter with NRV-Z51 DC-18GHz Power Sensor, 1µW-100mW, matching UZ-56 30dB 75W Attenuator
General
Level Meter URV35 from Rohde& Schwarz is a versatile voltmeter and power meter. Its rugged design, optional battery or AC supply operation and a remote-control interface are key features that afford manifold applications. URV35 is just as suitable for use in service and production as for precise measurements in the laboratory. The large variety of measuring heads available for the URV5-Z and NRV-Z series opens up a wide level and frequency range to the URV35. The high RF shielding provides for precise measurements even in the near field of antennas.
Operating concept
URV35 is menu-controlled – a feature that is normally found with larger instruments only. The menus allow the numerous measuring and setting functions to be selected in plain text and do away with difficult-to-remember numbers for special functions. Each measuring head is calibrated individually. The entire information stored in the measuring head such as calibration data, temperature response, frequency response, detector type is automatically evaluated in the URV35. The measuring head impedance is also taken into account so that the values displayed in W or dBm are always correct. Thanks to this intelligent operating concept and the autorange facility, the user has only to read the measurement result displayed.
Resolution and measurement range
The filtering which is dependent on the level and resolution as well as the optional 4
½- or 3½-digit readout guarantee a perfect display of the measured values for every application. The autorange facility ensures the correct setup of the instrument. Frequency-response correction With the frequency-response correction being enabled, the correction data stored in the measuring head are automatically taken into account to increase the measuring precision. For this purpose, the frequency is entered manually or via the serial interface. However, the frequency can also be entered in terms of an equivalent DC voltage at the DC FREQ input of the URV35. The full calibration precision is thus utilized during manual measurements with sweep generators. For this type of measurement, just two pairs of values (start, stop frequency + corresponding voltages) need to be entered.
manual available at http://nousnexus.com/Manuals/URV35_Manual.pdf
This item is in good condition, tested and working. All items shown are included in the listing.