HP EPM-442A (E4419A) Power Meter w/ 8481B 25W sensor, 11730C cable >Calibrated<

Description

This power meter is fully working and
calibrated.
You will also receive an HP 8481B 10 MHz to 18 GHz power sensor (1 mW to 25 W (0 dBm to +44 dBm)),
11730C 20 foot (6.1M) cable
In addition, we will re-calibrate the unit at our accredited lab prior to shipping and include your company information on calibration certificate .
See stancal.com for our capabilities
You will receive a calibration certificate w/data free of charge (5 value).
Warranty:  30 Day ROR
Accessories:   8481B sensor, 30 dB attenuator assembly, 11730C cable, power cord
Note:  Cables and equipment may be shown to demonstrate functionality and are NOT included
From Mfr. Specs:
The Agilent EPM-442A is fully compatible with the Agilent 8480 series and the E-series power sensors (except the Agilent E9320A family).
Depending upon which sensor is used, the Agilent EPM442A can measure from -70 dBm to +44 dBm at frequencies from 9 kHz to 110 GHz.
Designed for bench and automatic test equipment use (ATE), the Agilent EPM442A makes fast (up to 100 readings per second with E-series sensors), accurate and repeatable power measurements.
The Agilent EPM-442A is a true dual-channel power meter, which means that you get two simultaneous power readings on the display.
Hewlett Packard EPM-442A
100 kHz to 50 GHz Power Meter
Features:
100 kHz to 50 GHz, sensor dependent
-70 to +44 dBm (100 pW to 25W)
Fast measurement speed (up to 100 readings per second, over the GPIB, with E-series sensors)
Speed improvement of x2 using the Agilent 8480 series power sensor (compared to the Agilent 437B)
No range-switching delays with 8480 series sensors, and only one fast-range switching point with E-series sensors
RS 232/422 serial interfaces as standard
GPIB connector for remote control of all functions
Internal rechargeable battery option provides up to 3 hours continuous use (option 001)
Code compatibility with Agilent HP 438A
Agilent 8481B Power Sensor w/ 30 dB attenuator assembly
10 MHz to 18 GHz ;
1 mW to 25 W (0 to +44 dBm)
The 8481B power sensor is designed for use with the 435A/B, 436A, 437A, 438A, 70100A, EPM series, EPM-P series, E1416A, N1911A, N1912A, N1913A, and N1914A power meters.
provides extraordinary accuracy, stability, and lower SWR.
Excellent SWR for reducing mismatch uncertainty
Precision type-N connector as standard
All exports will be made in full compliance with all applicable U.S. government export regulations. No sales will be made directly or indirectly to any embargoed country, proscribed destination, denied party or restricted individual.