-40%
Hoppe Mortise Lock, Manual Single Point, 60mm Backset, 16mm Face Plate
$ 52.72
- Description
- Size Guide
Description
This will NOT work for replacing the lock body on multipoint lock units. This is a single point lock only.We are a Trusted National Distributor for HOPPE / FUHR parts and hardware, with factory warranties on parts purchased from us.
Hoppe Mortise Lock, Manual Gear, Single Point with 1 inch (25mm) Deadbolt throw
Used by Caradco, Norco and others.
Stainless face plate 5/8 (16mm) inch wide x 10-7/8 inches long
Face plate screw holes are spaced 10-1/8 inch
Backset: 2-3/8 inch (60mm) - distance from edge of face plate to center of lock handle