Gigatronics 8651A Single Channel Universal Power Meter

Description

These meters have various problems but they are cheap.  Buy several and  repair.
OFFERED AS IS - No Warranty
OEM Description
The Gigatronics 8650A Series Universal Power Meters have the extensive   measurement capabilities and unique features required to test today's   sophisticated communications systems faster and more accurately.  The   8651A can automatically measure the average power of pulse modulated   signals or pulse signals that are amplitude modulated during the pulse on   period such as TDMA signals.  Using the exclusive Burst Average Power   mode (BAP), the average power reading in the pulse burst is automati- cally   measured between the 3 dB points. Therefore, the duty cycle can change in   time without affecting the accuracy of the meter reading. This method   eliminates the need to manually set time gating, which can add errors if the   gate is not set accurately.  The 8651A has the wide, 80 dB single sensor   dynamic range required for CDMA signal open-loop tests, the speed you   need to quickly measure power during closed-loop tests, and the 10 MHz   bandwidth needed to test third-generation CDMA signals.  You can also   measure the instantaneous peak power level of a pulse modulated signal   with the 8651A.  A built-in delay line lets you trigger a few nanoseconds ahead of the pulse for   rising edge measurements. While a built-in time base gives you sample delay   control up to 100 ms after the trigger point with 0.5 ns resolution. And you   can view the profile and see the exact measurement point on the pulse.  Configuring the meter for measurements is easy with calibration factors   programmed into the sensor.  When the measurement frequency is entered,   the meter automatically applies the correct calibration factor from the sensor   EEPROM. And the meter automatically reads a new set of cal factors when a   sensor is changed.
Please note:  Any test equipment depicted other than that listed below is for demonstration purposes and is not included in the sale.
What's In The Box
QTY 1 - Gigatronics 8651A Power Meter (no accessories)
Return Policies
-NO RETURNS
Warranty
- NO WARRANTY
Damage in Shipment
- If your product arrives damaged you should contact the shipper immediately and contact us within 2 days of delivery at the destination address.  Please note that delays can result in denied claims.  Externally visible damage should be noted with the carrier upon delivery if possible.  Photos of any damage are extremely helpful.
Return Procedure
-  NO RETURNS
LN682