Diving board mount kit: 3-bolt x 3" long, s/s, white, 1-1/4"OD flat washer

Description

Diving board mounting hardware kit for 3-bolt boards.
All stainless steel hardware required for safe installation of most 3-bolt mounted diving boards including:
3) special plastic domed safety washers
3) 1/2" x 3" s/s carriage bolts
3) 1/2" x 1-1/4" x 1/8" extra thick s/s flat washers
3) 1/2" s/s lock washers
3) 1/2" s/s nuts
6) 1/2" x 2" x 1/16" rubber seal washers
3) white caps for nuts on bottom
Anti-seize compound pre-applied to bolt threads to prevent galling or seizing between bolt/ nut assembly.
I have one other three-bolt kit for sale with 3" long carriage bolts. Please measure your old bolt length carefully.
Other kits available with different flat washer outside diameters (2") and different carriage bolt lengths (3-1/2", 4-1/2", 5" and 5-1/2").
This kit recommended for salt water pools because it uses the plastic domed safety washer.
Please check my other listings or contact me for more info.