10GHz LCD RF Power Meter Set V7 N-Type Type-C USB High Performance Full-band NEW

Description

10GHz LCD RF Power Meter Set V7 N-Type Type-C USB High Performance Full-band RF Circuit Development Network Serial Communication
Description:
RF-Power-Meter-V7.0 series is a high-performance low-cost portable TYPE-C simple RF power meter with simple instruction, small size, stable performance, high accuracy, preset offset, wide dynamic range and fast measurement speed. 5V power supply and high-speed data communication are provided through TYPE-C. The software matched with this power meter enables users to configure the power meter on the PC and makes it easy to record and share data.
Application:
Calibration of RF instruments
Detection and maintenance of RF equipment
Measurement of standing wave ratio of RF circuit (adding feedback bridge)
Measurement of return loss of RF circuit
Interference detection between wireless communication equipment
RSSI (received signal strength indication) and transmit power level detection
Performance evaluation of step attenuator
Amplifier gain and network attenuation measurement
Measurement of forward power and reflected power in directional coupler
For GMSK modulation GSM signal power measurement
Feature:
Support a variety of high-speed dynamic acquisition, with a maximum of 500kbps (2uS) upper computer acquisition
Up to 10GHz RF signal acquisition function is supported
Built-in digital programmable attenuator (0-31.75DB), the maximum input power measured with digital attenuator is 30dBm (1W), and the dynamic range is +30dBm to -60dBm
The power meter V7.0 comes with 1.3-inch TFT LCD and built-in Li battery, which can be operated offline
The 4-port aviation plug is used to provide TTL serial port reading and writing function, and provide single and continuous data reading mode
The upper computer has two MARK cursor functions to measure the modulation pulse width; Automatic calculation of maximum and minimum values; The maximum storage depth is 500 points; Support pause, data saving and export functions
RF input interface: N-type male
Specification:
Measuring power range: -60~+30dBm (0~-40dbm has good linearity)
Measuring power resolution: ±0.1dBm
Measuring frequency range: 100K~10GHz (the frequency range of different models is different)
Input impedance: 50ohm
Dynamic range: 90dB
Working voltage 5VDC (power supply via TYPE-C line)
Charging current: 300mA
66*36*24CM (excluding protruding N head, refer to the given mechanical drawing for details); The fuselage is made of aluminum alloy shell processed by CNC, and its weight is less than 100g
Package include:
1 x RF-Power-Meter-V7.0
1 x USB cable
1 x TTL cable